Pro Accumaster VII
Pro Accumaster VII
The Accumaster is a scientific tool for the detection of treasures, metals, minerals, cavities, voids, subsurface water etc. Target determination is accomplished by measuring the total electrical resistance of the ground between the 4 ground rods, which are injected into the soil on a square or rectangular pattern, and presenting the results on a target meter as OHM values. Underground electrical resistance changes with factors like water, metals or caves. In our latest version the meter has labels for caves, inert ground, water, minerals, iron and precious metals. For the detection of a metal target it needs to have a mass of 2kg or more. Small coins or equal sized targets are not detected. That feature is specially usefull when search for treasures, as there is no interference from small and surface trash metal objects. It is a trully scientific tool used by archaeologists, mining industries, geologists and treasure hunters.
The most efficient professional equipment requires not any training or experience. Comes with a 12 Volt 7,2Ah battery and charger inside the case, and can be used by one operator. The Accumaster "Carrier wave" signal is transmitted undergound from 2 rods at a time, in total 6 directions on a square or rectangular form, like on the examples 1,2,3 & 4 shown below.
ACCUMASTER OHM TARGET METERHold a “test switch” for 2 seconds, to determine target location within a 24000 Sq. ft. area!
Specification & Features
Find the target location using the meter readings. When the 4 rods are laid just like on the examples below, gold and silver targets will indicate low OHM values at the Accumaster meter, with the meter needle pointing to the “yellow” area. In order to find the treasure depth, follow the method shown at example 4.
A low (360 ohm) indication represent a copper target
300 ohm represent gold target
Find the lowest reading and move towards it until the treasure is located
When target has been located, get target depth using this pattern