OKM Rover Gold - Gold Detector

OKM Rover Gold - Gold Detector for Prospectors


The Rover Gold is a gold, silver and mineral detector especially built for locating gold, silver and other mineral rich ore. This detector is unique, for it is primarily designed for the professional prospector for use within mines and mining environments.

After many years of testing in various mines, gold rich fields in places like Sudan, Tanzania, Malaysia, Mexico, USA, Australia and many other countries, the embedded sensor technology from OKM has made it possible to easily detect the gold ore.

New built in functionality like the Mineral Scan has simplified the operation for the professional as well as the novice. With the Rover Gold the following can be detected:

  • Gold Ore (including Tellurium, Calaverite, Sylvanite, Nagyagite)
  • Placer deposits in streams
  • Gold in quartz (Hard Rock)
  • Alluvial

rg5

Representation of a detected gold signature in the Visualizer 3D software recorded by the 'Rover Gold'.


Besides being able to locate naturally occurring gold and mineral ore, the Rover Gold is also for the treasure hunter to locate buried treasures. The Rover Gold 3D scanner has the same performance as the Rover C II and the Rover C with the Super Sensor. The detector is not limited to only gold, it can locate and identify a multitude of sub-surface objects, including:

  • Treasure caches and chests
  • Buried gold and silver jewellery
  • Historical artifacts including bronze and copper
  • Stash of coins
  • Ancient grave sites
  • Caves and Tunnels

Included with the Rover Gold is the Super Sensor which can discriminate between ferrous and non-ferrous metals. Non-ferrous metals include gold, silver, bronze, and copper, while ferrous metals include iron, nickel and cobalt.

Additionally with the Rover Gold you will receive a fully programmed Netbook computer with the Visualizer 3D software already configured. Allowing you to focus on the treasure or gold hunt and the location of items of great value.

The Visualizer 3D software can display the measurement values in a three-dimensional image that can be analyzed in detail to locate the buried objects. In the analysis for buried objects, the software can estimate the size and depth of the targets.

Other important implements with the Rover Gold include:


  • Simplified operating modes (Mineral Scan, Ground Scan and Pin Pointer)
  • Back-lit display for easy operation in mines and in the evening
  • LED lights for working at night or in dark places
  • Simplified software specific for the Rover Gold Mineral Scan
  • Ergonomic design, lightweight and agile allowing for longer searches
  • External Power Pack to work an entire day and quick charger
  • Unit enclosure in Desert Sand color to avoid overheating while working in the sun
  • Impact and water resistant Peli transportation case to protect your unit
  • Lightweight transport tube for Super Sensor

We have made the packaging of the unit as compact as possible allowing for the easy transportation into the field. The impact and water resistant Peli case as well as the lightweight transport tube make getting the equipment into the field easier and faster.

Like all OKM metal detecting products, the Rover Gold has been tested and certified by leading technical experts. It has proven its reliability and powerful performance on-site by many treasure discoveries and metal finds. Convince yourself during a visit in our factory (after appointment only). Try out and test this metal detector to decide if it fits to your metal detecting needs.

Technical Specifications


The following technical indications are medial values. During operation small variations are quite possible.

Control unit

Operating temperature
0 °C - 70 °C
Storage temperature
-20 °C - 60 °C
Air humidity
5 % - 75 %
Waterproof
No
Dimensions (H x W x D)
390 x 140 x 300 mm
Weight
about 1 kg
Voltage
12 V DC
Processor
Motorola, 32 MHz
Data memory (internal)
about 32700 measured values

Data transmission (Bluetooth)

Technology
Bluetooth
Frequency
2.4 – 2.4835 GHz
Maximum Transfer Rate
1 Mbps
Receiving Sensitivity
-85 dBm
Maximum Range
approx. 100 m

Computer, minimum requirements

The computer is not part of the scope of delivery. The indicated values should help you for a correct selection of a suitable computer for analysis of your measured results.

CD-ROM drive
minimum 4x
Interface (Data transmission)
USB
Free disk space
minimum 50 MB
Working memory (RAM)
minimum 256 MB
Graphic card
minimum 128 MB, OpenGL-compatible
Processor
minimum 1.2 GHz
Operating system
Windows XP, Windows Vista, Windows 7

Scope of delivery


In the following table you can see the complete delivery contents and all optional accessories.

The used symbols have the following signification:

x   =   x times included  
  =   Not included
  =    Optionally available, only for additional charge.

Description

3D software ( "Visualizer 3D" ) 1
Carrying tube 1
Control chip 1
Control unit 2
Mini laptop 1
Power Pack incl. charger and travel adapter 1
Super sensor 1
USB bluetooth dongle 1
User's manual 1
Wireless headphones incl. batteries 1

Rover Gold

The 'Rover Gold' gold detector with Super Sensor and wireless headphones.

With the Rover Gold the following can be detected:

  • Gold Ore (including Tellurium, Calaverite, Sylvanite, Nagyagite)
  • Placer deposits in streams
  • Gold in quartz (Hard Rock)
  • Alluvial

Made in Germany

Made in Germany

Compliance with the CE policies

Compliance with the CE policies

Product Images


The 'Rover Gold' metal detector is well packed in a Peli case and a carrying tube.The 'Rover Gold' gold detector with Super Sensor and wireless headphones.Some parts of the 'Rover Gold' scope of delivery.The Rover Gold is capable to detect hard rock gold in quartz.The Rover Gold is capable to detect hard rock gold in quartz.Representation of a detected gold signature in the Visualizer 3D software recorded by the 'Rover Gold'.Representation of a detected gold signature in the Visualizer 3D software recorded by the 'Rover Gold'.